Address objects—Two address objects, firewall-untrust-IP and internal-load-balancer-IP, which you will need to modify to match the IP addresses in your setup. You need to modify these address objects to use the private IP addresses assigned to eth1-VM-Series0 and eth1-VM-Series1 on the Azure portal.
above statement says that we should set firewall-untrust-IP and internal-load-balancer-IP to eth1 interface of VM0 and VM1.
I am wondering if this is correct.
internal-load-balancer-IP should be the IP address of the internal load balancer not the eth1 interface IP for VM1.
The Internal IP address of the Load Balancer should be a separate IP address. We provide a default configuration xml to upload. If you are following the deployment steps and If this is a default build in Github then you should be able to reach out to Palo Alto NEtworks TAC for support. The GitHub Read me page will list the support policy of whether the GitHub template you are deploying is community supported or Officially TAC supported.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!