Panorama in Azure is not detecting the attached logging disks

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Panorama in Azure is not detecting the attached logging disks

L2 Linker

Hello

 

I deployed Panorama in Azure. I attached a 2TB data disk as a logging disk for the Panorama VM but when I go to Panorama CLI and run the command "show system disk details" it says "No Disks available". I found the below article in the knowledge base and tried the resolution 2 but it's still the same. Does anyone know how can I fix this problem?

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000POP8CAO

1 accepted solution

Accepted Solutions

L2 Linker

I was able to make it detect the disk by doing the below.

I added a small 64GB disk as the logging Disk 1 and then the 2TB disk as the logging disk 2. I do not have an explanation for this, I just came to this by trial and error and this worked for m

View solution in original post

1 REPLY 1

L2 Linker

I was able to make it detect the disk by doing the below.

I added a small 64GB disk as the logging Disk 1 and then the 2TB disk as the logging disk 2. I do not have an explanation for this, I just came to this by trial and error and this worked for m

  • 1 accepted solution
  • 3667 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!