- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
09-18-2025 06:42 AM
Hi everyone,
Is it possible for us to somehow bypass/disable MFA for 1 specific user or groups? If yes, can anyone please provide the cyberark docs so I can check & try?
Thanks a lot.
09-18-2025 07:02 AM
Hi @Briamt Briamt ,
Yes, you can create a different authentication profile by including only the Password option there, and you have to assign that policy for the required users.
However, disabling MFA is not recommended.
Follow the guide: https://docs.cyberark.com/identity/latest/en/content/coreservices/authenticate/authprofilescreate.htm
09-18-2025 07:02 AM
Hi @Briamt Briamt ,
Yes, you can create a different authentication profile by including only the Password option there, and you have to assign that policy for the required users.
However, disabling MFA is not recommended.
Follow the guide: https://docs.cyberark.com/identity/latest/en/content/coreservices/authenticate/authprofilescreate.htm
09-20-2025 01:33 PM
Just to expand on this, you would use policies to target these users in Identity Administration. Let's say you've got just one policy right now, the Default one which targets all users in your tenant and enforces MFA for all of them. You would create a role for users / groups who you want to allow to bypass MFA and add the users / groups to it. Create an authentication profile which allows just one factor (as tagged by URaz above). Create a new policy and assign it to that specific role and under Authentication Policies, tag this authentication policy. Without an 'authentication rule', this sets up a blanket MFA bypass. Once you've done this, just ensure this new policy is placed higher than other policies that may target the same users / groups. (policies are enforced top-down)
As mentioned above, not having MFA is not recommended. Test rigorously. Depending on the use case for this exercise, you could also consider authentication rules when you're setting up the policy. This allows more control over which conditions users will be able to bypass MFA in, for instance, from specific IP addresses / date and time / whether there's an existing cookie / risk level for the user etc.
Also ensure you have breakglass accounts in place to ensure you're not locked out when testing these policies.
09-29-2025 03:09 PM
If you only need it temporarily bypass MFA just for one time because they left their phone somewhere, you could also use the MFA Unlock command to allow the user to log in without MFA within ten minutes after you select the command. https://docs.cyberark.com/identity/latest/en/content/coreservices/authenticate/mfasuspend.htm
09-30-2025 10:35 PM
Adding to above good suggestions.
Alternative Method would be to Use Role + Policy, Then Assign User. This method allows an admin to set up the bypass policy first, and later assign the specific user to the role when needed.
Step-by-Step Guide
1. Create a Role
2. Create a Policy Set
3. Configure Authentication Rules
4. Set a Default Profile
5. Assign the Specific User
hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

