Alert Tuning and Scoping Profile

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Alert Tuning and Scoping Profile

L5 Sessionator

This question was asked during our Customer Success Webinar: Alert Tuning Part 2

 

Can you provide a quick example of creating a scoping profile and applying it?

1 accepted solution

Accepted Solutions

L5 Sessionator

A reply by: @jmazzeo 

Go to Endpoints - Policy Management - Prevention -> Profiles

Create a new profile:

 
 

rtsedaka_5-1717430080416.png

 

 

 

 

Select the right OS, and then Exceptions:

 

rtsedaka_9-1717430258542.png

 

 

 

 

You only need to set a name and a description if needed, then Create it.

 

rtsedaka_7-1717430169161.png

 

 

Now, go back to Endpoints—Policy Management—Prevention -> Policy Rules to edit a current policy rule or create a new one.

  1. Select your created Exceptions Profile, within all the other required profiles.
  2. Select your target using the usual filters for the endpoints.
  3. Review and apply.
 

rtsedaka_8-1717430206743.png

 

 

Verify the order and content of the rules or re-order them to assign agents with the correct policy. Then click on Save at the bottom right.

View solution in original post

1 REPLY 1

L5 Sessionator

A reply by: @jmazzeo 

Go to Endpoints - Policy Management - Prevention -> Profiles

Create a new profile:

 
 

rtsedaka_5-1717430080416.png

 

 

 

 

Select the right OS, and then Exceptions:

 

rtsedaka_9-1717430258542.png

 

 

 

 

You only need to set a name and a description if needed, then Create it.

 

rtsedaka_7-1717430169161.png

 

 

Now, go back to Endpoints—Policy Management—Prevention -> Policy Rules to edit a current policy rule or create a new one.

  1. Select your created Exceptions Profile, within all the other required profiles.
  2. Select your target using the usual filters for the endpoints.
  3. Review and apply.
 

rtsedaka_8-1717430206743.png

 

 

Verify the order and content of the rules or re-order them to assign agents with the correct policy. Then click on Save at the bottom right.

  • 1 accepted solution
  • 575 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!