Endpoint shows as offline and is not clickable in an incident

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Endpoint shows as offline and is not clickable in an incident

L2 Linker

Hello everyone,

We have a problem recently that in Cortex incidents we see involved endpoint as offline, even though it is online (if we go to Endpoints in Cortex we see it online and "Last Seen" is very recent) and it is not clickable like before. This is the case for most of the endpoints since the last two weeks.

1 accepted solution

Accepted Solutions

L4 Transporter

Hello @Arman_Zaheri 

 

Thanks for reaching out on LiveCommunity!

Please try performing a manual checkin from endpoints table and after some time refresh incidents tab. If issue persists please open a support case with TAC team to investigate the problem further.

View solution in original post

2 REPLIES 2

L4 Transporter

Hello @Arman_Zaheri 

 

Thanks for reaching out on LiveCommunity!

Please try performing a manual checkin from endpoints table and after some time refresh incidents tab. If issue persists please open a support case with TAC team to investigate the problem further.

L2 Linker

Thanks for your help. It didn't work even after checking in. I'll open a support case.

  • 1 accepted solution
  • 953 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!