in XDR.. what are the steps if we need to create the group based on subnet

cancel
Showing results for 
Search instead for 
Did you mean: 

in XDR.. what are the steps if we need to create the group based on subnet

L0 Member

Hello,

 

Need help how to create groups in XDR based on the network subnets 

1 REPLY 1

L1 Bithead

Under the Endpoints menu hover over Endpoint Management, then select Endpoint Groups. Then on the upper right side of the new page select the add group button. Select create new from the menu that pops up. In the filter box search for IP Address. If you choose IP Address = then you can use CIDR notation (IE 10.0.0.1/24 or 10.0.0.1/16) or you can select IP Address Range, this will allow you to input a specific range of IP addresses.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!