An error message appears when adding or removing apps from installed apps in Windows system settings. This is apparently a known issue that is fixed in EPM SaaS 25.4. When is that version being rolled out to us??

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

An error message appears when adding or removing apps from installed apps in Windows system settings. This is apparently a known issue that is fixed in EPM SaaS 25.4. When is that version being rolled out to us??

L1 Bithead
1 accepted solution

Accepted Solutions

L5 Sessionator

Not sure if this link is different for each of us based on our region - CyberArk Endpoint Privilege Manager Status but scroll down says 25/4 is updated I haven't checked my Tenant yet. personally.

 

 

It may have changed up after the crowd strike incident - Someone did post saying 25.4 hasn't worked so myself based in the UK tend to see the agent last I think where we used to be first lol I think...

 

CyberArk follows a structured, gradual rollout process for new EPM agent versions:

 

1. **Development and Testing Phase**:

  - New versions undergo manual QA tests to verify changes and ensure they don't affect existing functionality

  - Automated tests are employed to cover various aspects of functionality

  - Compatibility testing is conducted when new versions or Microsoft/Apple patches are released

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

2. **Deployment Process**:

  - Initial deployment to a beta environment with CyberArk devices and beta customers

  - After 1-2 weeks of beta testing, the version is deployed to selected regions

  - Continuous monitoring for issues with immediate updates as needed

  - If no major issues are found after about a week, release to all other regions

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

3. **Regional Rollout**:

  - EPM releases are typically rolled out "gradually" across different regions

  - As confirmed in a community post: "agents will be gradually rolled out to all regions in the next few days/weeks"

  [Community Question](https://community.cyberark.com/s/question/0D5Ht00009lTVlSKAW)

 

4. **Release Frequency**:

  - According to a CyberArk support response, "we usually release new agents every two months, while the service itself is updated every month"

  [Community Question](https://community.cyberark.com/s/question/0D52J00008wHGuHSAW)

 

5. **Customer Control**:

  - The upgrade of agents is controlled by customers and not automated: "The upgrade of agents decision is up to the customer, and therefore controlled, and not automated at this point"

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

This gradual, region-by-region approach helps CyberArk mitigate risks and address any issues before widespread deployment.

 

Based on the knowledge sources provided, I don't have a specific link that comprehensively explains how all datacenters across regions are updated with new EPM agents. The information about EPM agent updates across regions is somewhat fragmented across different documents.

 

The closest relevant information comes from these sources:

 

1. The document about enhanced endpoint management support mentions that the endpoint management service is available in all regions, with different agent version support depending on the region:

 

  [Enhanced endpoint management support](https://docs.cyberark.com/epm/latest/en/content/admin/endpoints-mgmnt-support.htm#Enhancedendpointma...) shows that different regions (North America, Canada and UK, Switzerland, Australia, India, Japan, Singapore, Italy, UAE) support different minimum agent versions.

 

2. Regarding datacenter locations, the EPM SaaS technical datasheet mentions:

 

  "CyberArk currently runs SOC 2 Type II certified EPM services on AWS datacenters in the USA, UK, Germany, Canada, Australia, India, Japan, Singapore, Italy, Switzerland, UAE, and possible additional locations in the future." 

  [EPM SaaS technical datasheet](https://docs.cyberark.com/epm/latest/en/content/intro/saas%20technical%20datasheet.htm#EPMSaaStechni...)

 

3. There's also information about a new data center addition in Singapore and Tokyo:

  [What's new](https://docs.cyberark.com/ispss-access/latest/en/content/introduction/acc-whats-new.htm#DPAdatacente...)

 

However, there isn't a single comprehensive link that specifically explains the process of how all datacenters across regions are updated with new EPM agents. The general rollout process I described previously (testing, beta deployment, gradual regional rollout) appears to be the standard approach, but the knowledge sources don't provide a specific document link detailing this process for all datacenters.

View solution in original post

8 REPLIES 8

L5 Sessionator

Not sure if this link is different for each of us based on our region - CyberArk Endpoint Privilege Manager Status but scroll down says 25/4 is updated I haven't checked my Tenant yet. personally.

 

 

It may have changed up after the crowd strike incident - Someone did post saying 25.4 hasn't worked so myself based in the UK tend to see the agent last I think where we used to be first lol I think...

 

CyberArk follows a structured, gradual rollout process for new EPM agent versions:

 

1. **Development and Testing Phase**:

  - New versions undergo manual QA tests to verify changes and ensure they don't affect existing functionality

  - Automated tests are employed to cover various aspects of functionality

  - Compatibility testing is conducted when new versions or Microsoft/Apple patches are released

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

2. **Deployment Process**:

  - Initial deployment to a beta environment with CyberArk devices and beta customers

  - After 1-2 weeks of beta testing, the version is deployed to selected regions

  - Continuous monitoring for issues with immediate updates as needed

  - If no major issues are found after about a week, release to all other regions

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

3. **Regional Rollout**:

  - EPM releases are typically rolled out "gradually" across different regions

  - As confirmed in a community post: "agents will be gradually rolled out to all regions in the next few days/weeks"

  [Community Question](https://community.cyberark.com/s/question/0D5Ht00009lTVlSKAW)

 

4. **Release Frequency**:

  - According to a CyberArk support response, "we usually release new agents every two months, while the service itself is updated every month"

  [Community Question](https://community.cyberark.com/s/question/0D52J00008wHGuHSAW)

 

5. **Customer Control**:

  - The upgrade of agents is controlled by customers and not automated: "The upgrade of agents decision is up to the customer, and therefore controlled, and not automated at this point"

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

This gradual, region-by-region approach helps CyberArk mitigate risks and address any issues before widespread deployment.

 

Based on the knowledge sources provided, I don't have a specific link that comprehensively explains how all datacenters across regions are updated with new EPM agents. The information about EPM agent updates across regions is somewhat fragmented across different documents.

 

The closest relevant information comes from these sources:

 

1. The document about enhanced endpoint management support mentions that the endpoint management service is available in all regions, with different agent version support depending on the region:

 

  [Enhanced endpoint management support](https://docs.cyberark.com/epm/latest/en/content/admin/endpoints-mgmnt-support.htm#Enhancedendpointma...) shows that different regions (North America, Canada and UK, Switzerland, Australia, India, Japan, Singapore, Italy, UAE) support different minimum agent versions.

 

2. Regarding datacenter locations, the EPM SaaS technical datasheet mentions:

 

  "CyberArk currently runs SOC 2 Type II certified EPM services on AWS datacenters in the USA, UK, Germany, Canada, Australia, India, Japan, Singapore, Italy, Switzerland, UAE, and possible additional locations in the future." 

  [EPM SaaS technical datasheet](https://docs.cyberark.com/epm/latest/en/content/intro/saas%20technical%20datasheet.htm#EPMSaaStechni...)

 

3. There's also information about a new data center addition in Singapore and Tokyo:

  [What's new](https://docs.cyberark.com/ispss-access/latest/en/content/introduction/acc-whats-new.htm#DPAdatacente...)

 

However, there isn't a single comprehensive link that specifically explains the process of how all datacenters across regions are updated with new EPM agents. The general rollout process I described previously (testing, beta deployment, gradual regional rollout) appears to be the standard approach, but the knowledge sources don't provide a specific document link detailing this process for all datacenters.

L4 Transporter

Not sure if this link is different for each of us based on our region - CyberArk Endpoint Privilege Manager Status but scroll down says 25/4 is updated I haven't checked my Tenant yet. personally.

 

 

It may have changed up after the crowd strike incident - Someone did post saying 25.4 hasn't worked so myself based in the UK tend to see the agent last I think where we used to be first lol I think...

 

CyberArk follows a structured, gradual rollout process for new EPM agent versions:

 

1. **Development and Testing Phase**:

  - New versions undergo manual QA tests to verify changes and ensure they don't affect existing functionality

  - Automated tests are employed to cover various aspects of functionality

  - Compatibility testing is conducted when new versions or Microsoft/Apple patches are released

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

2. **Deployment Process**:

  - Initial deployment to a beta environment with CyberArk devices and beta customers

  - After 1-2 weeks of beta testing, the version is deployed to selected regions

  - Continuous monitoring for issues with immediate updates as needed

  - If no major issues are found after about a week, release to all other regions

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

3. **Regional Rollout**:

  - EPM releases are typically rolled out "gradually" across different regions

  - As confirmed in a community post: "agents will be gradually rolled out to all regions in the next few days/weeks"

  [Community Question](https://community.cyberark.com/s/question/0D5Ht00009lTVlSKAW)

 

4. **Release Frequency**:

  - According to a CyberArk support response, "we usually release new agents every two months, while the service itself is updated every month"

  [Community Question](https://community.cyberark.com/s/question/0D52J00008wHGuHSAW)

 

5. **Customer Control**:

  - The upgrade of agents is controlled by customers and not automated: "The upgrade of agents decision is up to the customer, and therefore controlled, and not automated at this point"

  [Community Question](https://community.cyberark.com/s/question/0D5Ht0000AR6QQaKQN)

 

This gradual, region-by-region approach helps CyberArk mitigate risks and address any issues before widespread deployment.

 

Based on the knowledge sources provided, I don't have a specific link that comprehensively explains how all datacenters across regions are updated with new EPM agents. The information about EPM agent updates across regions is somewhat fragmented across different documents.

 

The closest relevant information comes from these sources:

 

1. The document about enhanced endpoint management support mentions that the endpoint management service is available in all regions, with different agent version support depending on the region:

 

  [Enhanced endpoint management support](https://docs.cyberark.com/epm/latest/en/content/admin/endpoints-mgmnt-support.htm#Enhancedendpointma...) shows that different regions (North America, Canada and UK, Switzerland, Australia, India, Japan, Singapore, Italy, UAE) support different minimum agent versions.

 

2. Regarding datacenter locations, the EPM SaaS technical datasheet mentions:

 

  "CyberArk currently runs SOC 2 Type II certified EPM services on AWS datacenters in the USA, UK, Germany, Canada, Australia, India, Japan, Singapore, Italy, Switzerland, UAE, and possible additional locations in the future." 

  [EPM SaaS technical datasheet](https://docs.cyberark.com/epm/latest/en/content/intro/saas%20technical%20datasheet.htm#EPMSaaStechni...)

 

3. There's also information about a new data center addition in Singapore and Tokyo:

  [What's new](https://docs.cyberark.com/ispss-access/latest/en/content/introduction/acc-whats-new.htm#DPAdatacente...)

 

However, there isn't a single comprehensive link that specifically explains the process of how all datacenters across regions are updated with new EPM agents. The general rollout process I described previously (testing, beta deployment, gradual regional rollout) appears to be the standard approach, but the knowledge sources don't provide a specific document link detailing this process for all datacenters.

L1 Bithead

Over the weekend our SaaS tenant was upgraded to 25.4.0.4665. Our client version is the latest available to us 25.2.0.2476.

We are still getting the error below when clicking on "Installed apps":

Field_Content_versions_oct20__068Vy00000UhsP3IAJ.pngDoes anyone know what else we need to do to fix this?

 

Thanks for the comprehensive information @Touseef-ur rehman​ 

Yeah sign up as you get emails stating whats being updated and fixed etc by clicking subscribe to updates.

Yeah sign up as you get emails stating whats being updated and fixed etc by clicking subscribe to updates.

L4 Transporter

Hello @James Sidwell​ 

 

Have you received an answer to your question? If so, we kindly encourage you to share it with us.

Your insights could be valuable to other community members in the future.

 

Thank you, Isar.

L1 Bithead

The issue was fixed on the 2nd May by updating to the latest client v. 25.4.0.2518. The client was not made available when our tenant was updated to 25.4 and we had to wait a couple of weeks for it.

  • 1 accepted solution
  • 74 Views
  • 8 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!