In this article, we will share some frequent questions related to how often the EPM Agent checks in with the console.
Steps
These are some frequent questions related to how often the EPM Agent checks in with the console:
Q: If the EPM agent is reinstalled, will the agent check in automatically with the console once its reinstalled?
A: Yes. It needs to go through a re-registration process on the SaaS back end and then should sync policies momentarily after that.
Q: When a computer is powered on, does the agent sync to the console?
A: Yes, after the Windows vf_agent service starts and the network is established. * see below
Q: When the computer is resuming from sleeping mode, does the agent will sync to the console?
A: Yes * see below
Q: When the agent has been disconnected from the network, once reconnected will it sync to the console?
A: Yes * see below
* EPM Agents are always checking on a 30-second interval to see if they can communicate with EPM SaaS. This interval was previously a setting that could be adjusted in (EPM > Advanced Server Configuration). However, now it can not be modified. Realistically, it should be about a minute or so because the agent needs to establish long polling/connectivity with EPM SaaS.
After checking in to the console, the EPM agent may perform additional actions. Examples:
- Perform agent registration if it has just recently been installed.
- Upload events, based on the "Flush" interval configured in advanced agent configuration.
- Download policy changes, dependent on settings configuration in the advanced agent configuration.
- Process server instructions for actions such as moving sets, uninstalling, upgrading, etc.