EPM - Copy LCD Key Between Sets

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Endpoint Privilege Manager (EPM) Articles
1 min read
L0 Member
No ratings
Issue:
You may wish to copy the Loosely Connected Device (LCD) key between sets. Attached to this article (Sync_LCD_Key.zip) are a script that will do that for you, and instructions on how to use the script.

Steps

The attached script should copy the security key value from one set to another.

1. Make sure the DB connection points To VFEVENTSDB5 When running

2. Assumption: the 2 sets are in the same DB

3. Input parameters:

Source Set
Source Policy name

Target Set
Target policy name

From the beginning of the script:
--Source Policy Name & SetId 
@SourcePolicyName nvarchar(512) = N'LCD1', 
@SourceSetId uniqueidentifier = '365C75BC-10DF-4F5A-BE42-EE6CBBCCE4D0', 

--Target Policy Name & SetId 
@TargetPolicyName nvarchar(512) = N'testpolicy', 
@TargetSetId uniqueidentifier = 'D9D7BC47-7601-4464-B2A4-F037FFBC325F'

 

The security key value should be copied from the policy in the source set to the policy in the target set.
Rate this article:
  • 1401 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎04-14-2020 01:00 PM
Updated by: