EPM - Endpoints (Beta) Connectivity Challenges

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Endpoint Privilege Manager (EPM) Articles
1 min read
L0 Member
No ratings

Question

EPM Agent shows disconnected or is not visible in the Endpoints (Beta) pane. What could be causing this issue?

Answer

ka3Vy00000887yzIAA__eid=ka3Vy00000887yz&feoid=00N2J000009R3kg&refid=0EMVy00000VVEKz.png

The EPM Console currently provides two interfaces for managing endpoints: My Computers (Legacy) and Endpoints (Beta). When implementing outbound firewall rules, it is essential to update your allow list to include the new EPM URLs. This ensures full functionality of the enhanced endpoint management capabilities and supports agent upgrades.

 

🔐An example of new required URLs for the USA Region

To enable proper connectivity for EPM Agents version 24.12 and above with Endpoints Beta, the following URLs must be allowed:

- https://files-na.epm.cyberark.com (new)

- agents-na.epm.cyberark.com (new)

 

📌 Minimum Agent Version Requirement

Endpoints Beta requires a minimum supported agent version. Please refer to the official documentation for details via the link below.

Minimum required agent version for certain actions

 

 

🌐 Outbound Traffic Rules

Ensure your network configuration aligns with CyberArk’s guidelines for outbound traffic.

NOTE: If your organization uses SSL inspection, you must configure it to exclude the EPM service URLs listed in the following table.
This ensures communication between EPM agents and the SaaS service.

Complete documentation is available via the link below.

Network Setup

 

Rate this article:
  • 809 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎09-17-2025 01:24 PM
Updated by: