EPM MacOS Prepare Activation Command

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Endpoint Privilege Manager (EPM) Articles
2 min read
L0 Member
No ratings

Starting with EPM Agent 25.6 Idira is providing a tool to build a post-install activation script.

Steps

  • Downloaded the Agent Install Package to a Mac and unzip it
  • Open terminal and navigate to the location where you extracted the install package.  This file may not be executable.  If needed, run this command to make it executable

sudo chmod +x prepare_activation.command

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RBqGi.png

  • Before launching ./prepare_activation.command ensure that the .config file is in the same folder
  • Try to launch  ./prepare_activation.command
  • If you see a message like this...

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RCosj.png

...then you will need to allow it to run.  Go to system settings > Privacy and Security.  Look in the "Security" section.  If you see "Prepare_activation.command was blocked to protect your Mac" then click "Open Anyway"

 

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RCGXj.png

Try to launch again using ./prepare_activation.command

 

  • Example of successful generation

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RCOrr.png

 

  • Use finder to browse to the extracted install folder. You should now see a new file named "epm_activation.sh".  Open that using textedit

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RCXiE.png

  • Find where the DEFAULT_INSTALLATION_KEY is set to "" (shown below).  Paste your installation key in between those quotes

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RBgfW.png

  • Optional: If you intend to specify an admin username during the activation, enter the credentials in between the quotes for DEFAULT_ADMIN_USER and DEFAULT_ADMIN_PASSWORD as shown below. 

This is needed to enable credential rotation.  More info about this option:

https://docs.cyberark.com/epm/latest/en/content/installation/macos-installagents.htm?Highlight=prepa...

ka3Vy000009IFyyIAG__eid=ka3Vy000009IFyy&feoid=00N2J000009R3kv&refid=0EMVy00000RCmm6.png

  • Save epm_activation.sh
  • Deploy this script after pkg installation to activate EPM
Rate this article:
  • 1271 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-05-2026 11:49 AM
Updated by: