EPM Policy Best Practices – Enabling QuickStart on existing sets

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Endpoint Privilege Manager (EPM) Articles
1 min read
L0 Member
No ratings
Problem: Once default policies are enabled on an existing set in EPM, you are not able to activate QuickStart.
You may be inclined to create a new set, activate QuickStart, and export the QuickStart policies to your production set.  However, there is an even better solution to solve this issue.


Solution: The quickest way to restore the Activate QuickStart option is to toggle all your default policies off, activate QuickStart, and then reenable your default policies.

Steps

The QuickStart activation option is available under Policies > Policies Recommendations in the EPM console for your set.
ka3Vy000003dbWgIAI__eid=ka3Vy000003dbWg&feoid=00N2J000009R3kv&refid=0EMHt000005angC.png
This option disappears when any of the Privilege Management settings are turned on.  You can verify this by going to Policies > Default Policies
ka3Vy000003dbWgIAI__eid=ka3Vy000003dbWg&feoid=00N2J000009R3kv&refid=0EMHt000005angD.png
If you have any of these settings turned on, toggle all to off then click on Policy Recommendations again where the Activate QuickStart option should be available.  Proceed with activation of QuickStart and then you can return back to Default Policies to turn those default policies back on.
Rate this article: