- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
06-19-2019 11:49 PM
When you right click on Endpoint in My Computers for any Set, what is Enable Support mode? What does that do?
06-20-2019 12:19 AM
Hey @Aniket Bhosale
From what I've seen it assists with ProcMon enablement for a specific time frame while an error is reproduced. It's not something you'd want to enable unless you're working to debug a problem that's occurring.
For example, here is a typical request from Support for such activity:
"Can you run the following:
1. Set your agent to collect all traces, on EPM console>Advanced> Agent configuration> Policy Usage in Agent Trace , set this to "Trace All" and Saved.
2. Next on EPM console> My computers, right click on the endpoint that you are going to gather the logs and choose "Enable Support mode" (choose the endpoint time zone and enable support mode for 1hr)
3. On the endpoint that is affected, right click on agent and click on Request settings to get latest policy.
4. Right click on the agent again and choose "Get Support Info", check all the boxes including "Process Monitoring Recording Session" and click on "Continue" and "Accept".
5. When the Process Monitor Recorder is loaded, click on "Record" button, wait for the timer to start and now reproduce the UNC issue .
6. Once you see the issue, click on " Done" button and click on "Continue" and "Done"
7. Once the file is collected, attached it to the case and I will check internally. "
Hope this helps.
-Matt
06-19-2019 11:57 PM
Hey @Aniket Bhosale
It's to assist in debugging issues.
-Matt
06-20-2019 12:12 AM
Hi @Matt Jennison Thanks for reply. If you don't mind, can you please elaborate more on this?
06-20-2019 12:19 AM
Hey @Aniket Bhosale
From what I've seen it assists with ProcMon enablement for a specific time frame while an error is reproduced. It's not something you'd want to enable unless you're working to debug a problem that's occurring.
For example, here is a typical request from Support for such activity:
"Can you run the following:
1. Set your agent to collect all traces, on EPM console>Advanced> Agent configuration> Policy Usage in Agent Trace , set this to "Trace All" and Saved.
2. Next on EPM console> My computers, right click on the endpoint that you are going to gather the logs and choose "Enable Support mode" (choose the endpoint time zone and enable support mode for 1hr)
3. On the endpoint that is affected, right click on agent and click on Request settings to get latest policy.
4. Right click on the agent again and choose "Get Support Info", check all the boxes including "Process Monitoring Recording Session" and click on "Continue" and "Accept".
5. When the Process Monitor Recorder is loaded, click on "Record" button, wait for the timer to start and now reproduce the UNC issue .
6. Once you see the issue, click on " Done" button and click on "Continue" and "Done"
7. Once the file is collected, attached it to the case and I will check internally. "
Hope this helps.
-Matt
06-20-2019 12:28 AM
@Aniket Bhosale?
I also found an Article that provides some details as well:
https://community.cyberark.com/s/article/00004982
Thanks,
-Matt
06-20-2019 02:52 AM
Hi @Matt Jennison Many thanks for your note. It would be indeed helpful. Have a nice day ahead.!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

