Using version 1.1.1. I noticed that when I am editing a security policy it will usually remove one of the source security zones. It appears that if there is more than one source zone this happens, not if there is a single zone listed.
Can someone else confirm?
Solved! Go to Solution.
Are you using a Panorama configuration? I am seeing similar behavior in Panorama configurations that have templates, but the templates do not have any interfaces or virtual router configurations. Can you check if your configuration file is a Panorama configuration and has templates with no interfaces and virtual router configurations?
Fyi, I am not seeing this behavior with Panorama configurations that have templates with interface and virtual router configurations.
I couldn't replicate it either.
I've seen this happen when I tried to edit a bunch of rules and Expedition was still processing it and I made a change. I lost 900+ source zones. I learned to wait for Expedition to process the multi-edit selection.
I too noticed (and reported it to this community) that the rules are not being ported in order as they are in the ASA.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!