Cisco to PA-440 - import of configuration hangs

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cisco to PA-440 - import of configuration hangs

L0 Member

I'm running the latest version of Expedition 1.x and I'm attempting to migrate my config from an ASA to a PA-440.  When I attempt to import the resulting config to the Palo, it hangs and just sits at the "uploading" status.  I'm on the latest 11.x version on the 440.  Not sure if there's something I need to do in Expedition or if there's something I'm missing elsewhere.

1 REPLY 1

L4 Transporter

Hi @S.Jones320106 

Thanks for reaching out.

I'm assuming you did the merge with your ASA and PANOS configuration and now you are executing the API calls to push them directly to your device.

If my assumption is fine, please could you check the logs on below paths:

- /home/userSpace/devices/debug.txt

- /home/userSpace/devices/$DEVICE_SERIAL_NUMBER/debug.txt

I would suggest to send an email to fwmigrate@paloaltonetworks.com to continue the troubleshooting.

Thanks and best regards,

David

  • 740 Views
  • 1 replies
  • 0 Likes
  • 77 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!