IPv6 networks converted to 1.1.1.1 IPv4 /32 host.

[thovanec]

Hello,

we are trying to migrate configuration from Cisco Firepower using Expedition to Palo Alto. When it comes to address objects, IPv6 networks are not migrated properly. The object name is modified automatically where at the end of the IPv6 address object expedition adds -32 and changes IPv6 address to 1.1.1.1. It is even marked as IPv4 address. This is not happening with IPv6 hosts. Does anyone experience same problem or have some workaround for IPv6 networks? We are using IPv6 frequently and it would require a lot of manual work. If you check the attachment, all referenced objects are IPv6 networks converted to 1.1.1.1 and name has -32 suffix added by the tool.

thanks

Tomas

[azuniga]

Hello @thovanec 

Can you please reach out to fwmigrate@paloaltonetworks.com with your problem so that we can look into it further?

Thank you!