12-16-2022 08:42 AM
Trying to migrate SRX 5800 ver 20.4R3-S3.4 cluster using Expedition. I have done quite a few SRX migrations but this one doesn't show any of the global routing instance information. Because of this there are tons of BGP and OSPF configuration that wont show up. Does anyone have any experience with this issue? Is there another way to bring the BGP and OSPF config from the SRX 5800 into Expedition. If not I will have to manually build it on the Palo.
12-16-2022 09:53 AM
@DustinBranham Only static routes are supported by Expedition , Dynamic routing configuration are not supported, those will need to be rebuild in Palo Alto Networks Firewall.
12-16-2022 09:53 AM
@DustinBranham Only static routes are supported by Expedition , Dynamic routing configuration are not supported, those will need to be rebuild in Palo Alto Networks Firewall.
01-07-2023 05:49 AM
Export your BGP routes to a text file and append them as static routes to your config file manually, this'll allow expedition to read them in and works easier on your NAT/Security policies regarding their zones.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
