Migration of Cisco PIX configuration - Help needed

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Migration of Cisco PIX configuration - Help needed

L1 Bithead

Hi Expedition Forum,

 

When migrating from a Cisco PIX I am receiving the following error when I attempt API call to push to Panorama.

 

This is the PIX line.

access-list FROM-Zone extended permit icmp object-group Subnets any unreachable

 

/config/devices/entry[@name='localhost.localdomain']/device-group/entry[@name='DG-Host-device']/application

<application><entry name="icmp_destination_unreachable"><category>networking</category><subcategory>ip-protocol</subcategory><risk>1</risk><technology>network-protocol</technology><evasive-behavior>no</evasive-behavior><consume-big-bandwidth>no</consume-big-bandwidth><used-by-malware>no</used-by-malware><able-to-transfer-file>no</able-to-transfer-file><has-known-vulnerability>no</has-known-vulnerability><tunnel-other-application>no</tunnel-other-application><tunnel-applications>no</tunnel-applications><prone-to-misuse>no</prone-to-misuse><pervasive-use>no</pervasive-use><file-type-ident>no</file-type-ident><virus-ident>no</virus-ident><data-ident>no</data-ident><default><ident-by-icmp-type><type>3</type><code>0</code></ident-by-icmp-type></default></entry></application>

 

Answer from device:
{"1":{"device":"Panorama","status":"fail","text":"<msg><line><![CDATA[ application -> icmp_destination_unreachable \\'icmp_destination_unreachable\\' is already in use]]><\/line><\/msg>","date":"2020-03-04 16:54:58"}}

 

Any help is greatly appreciated.

 

Regards,

Ben

1 accepted solution

Accepted Solutions

Hi Lynn,

 

It appears that the line "access-list FROM-Zone extended permit icmp object-group Subnets any unreachable" created a NEW application that was a duplicate of the inbuilt icmp_unreach

 

Thanks for your help 🙂 

View solution in original post

5 REPLIES 5

L6 Presenter

Hi Benjiman,

 

I tried your API in my environment , using Expedition version 1.1.59 and Panorama 8.1 and the API call is successfully and I was able to see the custom-AppID , 'Iicmp_destination_unreachable" show up in the panorama.  What version is your expedition and Panorama in your environment?

 

Thank you!
Lynn

Hi Lynn

 

Thank you for your quick response. 

 

Panorama is running at 9.0.4

Expedition is 1.1.58.1 (fresh install yesterday to attempt to rectify the issue)

 

I'm also experiencing a lot of issues when merging, like it will change interface names to Ethernet2, rather than ethernet1/1... and remove associations from Zones etc...

Hello Benjiman,

 I will recommend you to upgrade your expedition to latest version which is 1.1.59 to see if it works after upgrade.

I already tried an update yesterday, this new version must have come out within the last 18 hours. 

Is there a link between Expedition versions and Panorama versions?

Hi Lynn,

 

It appears that the line "access-list FROM-Zone extended permit icmp object-group Subnets any unreachable" created a NEW application that was a duplicate of the inbuilt icmp_unreach

 

Thanks for your help 🙂 

  • 1 accepted solution
  • 4753 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!