12-15-2022 12:48 PM
I'm using the expedition v.1.2.47. I'm trying to add a PA3430, but this model is not available from the drop down list for devices.
Is v. 1.2.47 the latest? I just installed this version today per the installation guide.
12-20-2022 09:45 AM
@SeanPurvis Yes, for Palo Alto Network firewall toPalo Alto Network firewall migration, you do not need to use expedition, you can load the config directly.
12-15-2022 03:02 PM
@SeanPurvis The model type is cosmetic, you can select any PA3200 model should work.
12-20-2022 05:14 AM
Maybe I'm misunderstanding how this should work? I have a 5220 series and we are replacing it with a 3430 series. I was going to upload the config for the 5220 and convert the config to work with a 3430. The interfaces on a 3200 series is different for a 3400 series. So I did not think it would work the way I wanted it too. I ended up exporting the 5220 config as an XML and editing it and then uploaded it to the 3430. That seemed to work and the config from the 5220 did upload to the 3430 successfully. Do you think I should be good? Thanks for your help!
12-20-2022 09:45 AM
@SeanPurvis Yes, for Palo Alto Network firewall toPalo Alto Network firewall migration, you do not need to use expedition, you can load the config directly.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
