- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-26-2023 04:42 PM
Hi All,
I have a question about NAT'ng multiple public IPs in PAN to a single host.
We plan to migrate the FTP server to the public IP below (2nd DNAT)
(DNAT) - This is the current policy where we use it as an SSH server, does not have any specific ports
SSH server 191.143.124.32 ---> Mapped to 172.30.50.108
(DNAT) - This should be a new policy to use it as an FTP server.
FTP server 191.143.124.33 ---> Mapped to 172.30.50.108:21
My question is, will this work and do I still need to port forward it to Port 21 or leave it as default on the NAT destination rule?
Thank you in advance.
02-26-2023 04:57 PM
Hi @mudvayne15 ,
It will work, but you need to put the more specific rule with the port 1st since the policy flows top down and picks the 1st match.
Thanks,
Tom
02-26-2023 04:57 PM
Hi @mudvayne15 ,
It will work, but you need to put the more specific rule with the port 1st since the policy flows top down and picks the 1st match.
Thanks,
Tom
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!