Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-05-2018 11:59 AM
My organization purchased two 5220's to run in active/passive HA, but the VAR did not mention needing transceivers/cables for the HSCI ports, or the possibility of needing to use the HSCI ports for HA. I would prefer to not have to wait on a capital expenditure request to put this in production. Would we be fine using CAT6A on the 10GB ports for HA2? We are running a maximum of 60Mbps through our current firewall.
10-05-2018 02:48 PM - edited 10-05-2018 02:48 PM
You don't need to use the HSCI port for HA 2.
You can set any interface you want, embedded copper or the SFP(+) ports, for "HA" then use that interface for your HA2 config.
10-05-2018 02:48 PM - edited 10-05-2018 02:48 PM
You don't need to use the HSCI port for HA 2.
You can set any interface you want, embedded copper or the SFP(+) ports, for "HA" then use that interface for your HA2 config.
10-05-2018 03:02 PM
Hello,
I could be wrong, but I thought the 5220 had 2x HA ports? They both should be rj45.
Is this not correct?
Regards,
10-05-2018 06:25 PM
It does but the documentation states they are for HA1-A and HA1-B. I suppose you could mix and match and use whichever for whatever, I'm not really sure.
10-07-2018 08:45 AM
The two RJ-45 HA ports on a 5220 are dedicated solely for HA1 connections; they cannot be utilized for HA2.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
