My customer use two M-100s.
One is used to Panorama and another is used to log-collector.
I upgraded two M-100s from 6.0.9 to 6.1.10.
I used manual upgraded way because environment what can not access to internet.
1. panorama was upgraded to 6.1.0 manual.
2. panorama was upgraded to 6.1.10 manual
3. log-collector was upgraded to 6.1.0 manual. using 'device deployment' menu
4. log-collector was upgraded to 6.1.10 manual. using 'device deployment' menu
I tried to reboot 4 times on for two M-100s.
But there was no FSCK perfoming. never.
Uptimes were over 380 days.
I expected M-100s must perform FSCK two times.
why did not M-100s perform FSCK?
Because log collector environment? or manual upgrade?
Please let me know it.
Hi...Did you attach a terminal to the console port and watch the bootup process? There are system messages on the console that should provide information on success/failure.
Are the M100s working ok after the reboot?
Thanks for your attention.
They are working well.
I was away from them. So I could not access to console port.
But they were boot up after 5 minutes.
Do you know how to check when they were done to perform FSCK last?
I just wonder whether there is a something cli command or not.
If there is the command, At next chance I will check when they perofomed FSCK last before rebooting.
I think I will need to make sure the days whether over 90 days or not.
If ok, something like this:
Feb 11 10:36:51 DEBUG: Unmounting Disk Pair D (/dev/md4)
Feb 11 10:36:51 WARNING: Starting to check the file system integrity of the Raid Disk Pair D
Feb 11 10:36:51 ERROR: e4fsck 1.41.12 (17-May-2010)
Feb 11 10:36:51 DEBUG: D: clean, 20347297/61054976 files, 190167989/244189984 blocks (check in 2 mounts)
Feb 11 10:36:51 WARNING: Done checking the file system integrity of the Raid Disk Pair D
Feb 11 10:36:51 DEBUG: Mounting Disk Pair D (/dev/md4)
And also check with :
>show system raid detail
(But this you might very well know...)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!