07-10-2013 02:22 AM
Hi,
Does PaloAlto support NAT and PAT for SCCP ?
Thanks.
07-10-2013 05:24 AM
Hi
It should NAT and PAT when for not only the parent sccp session ( controls session ) but also for the predict sessions ( pin hole sessions for the actual traffic succeeding the control session ) too.
the below commands will be useful to look at the NATed IPs when the sessions are formed:
>show session all filter application sccp
>show session all filter type predict
BR,
Karthik RP
07-10-2013 05:24 AM
Hi
It should NAT and PAT when for not only the parent sccp session ( controls session ) but also for the predict sessions ( pin hole sessions for the actual traffic succeeding the control session ) too.
the below commands will be useful to look at the NATed IPs when the sessions are formed:
>show session all filter application sccp
>show session all filter type predict
BR,
Karthik RP
07-10-2013 06:12 AM
why not ?
did you test it ?
for PAT for me there is no problem it could work.
and you need I think to create a static source NAT with bidirectional fonctionality enable
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
