ACTICE/PASSIVE CONFIG SYNC PROBLEM( Running cofiguration not synchronize)

[Jafar_Hussain]

Hello All,

The firewalls are configured in high availability (A/P) but the running configuration is not synchronized.

I have already tried to restarting management server of both firewall as well I tried to sync manually but getting below error:-

After that, I have tried to sync from CLI mode by this command:- request high-availability sync-to-remote running-config

is showing failed to synchronize running-config.

Can anyone help me?

[MP18]

On the Active PA click on syn to peer 

Also before that install all the dynamic updates on both active and passive firewall

[Jafar_Hussain]

@MP18  I have tried already but same issue persist.

[MP18]

Try this on PAssive PA

 request high-availability sync-to-remote running-config

[Jafar_Hussain]

@MP18  I have tried this command to both firewall but same issue was happening.

[MP18]

On active PA any change done?

if you revert back to previous config on active PA does it work?

Paste the output of 

less mp-log ha_agent.log

[MP18]

Also For successful HA configuration, the below must match between the two firewalls.

Version Compatibility:
Software Version: Match
Application Content Compatibility: Match
Anti-Virus Compatibility: Match
Threat Content Compatibility: Match
VPN Client Software Compatibility: Match
Global Protect Client Software Compatibility: Match

[Jafar_Hussain]

@ It is necessary to import all certificates from active firewall to passive firewall?