12-01-2017 12:54 PM
Can someone tell me what the supported configurations are for an active | active dual wan configuration in regard to physical wiring.
Can I have one ISP connected to one Palo and the other ISP on another Palo or do I need both connected to both, run through a switch with two external VLANs and a virtual IP on either ISP?
Tom
12-03-2017 05:18 AM
I have run Active/Active with the ISP upstream links run directly to the two PA devices. This is an option.
Obviously if there is a PA hardware failure that particular ISP is then no longer available. But in some DC scenarios it makes more sense to lose this ISP then add the complications of the additional devices in line with the service.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
