Active Passive HA

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Active Passive HA

L0 Member

I'm trying to setup HA for a pair of HA-3020 and the HA widget is all green and synched.

 

I have a network connection on our cisco core on Ethernet1/3 for the trusted network called TrustedL3 on the Primary firewall.

 

Do I need to use the same IP number from the Primary to the Passive firewall?  I am routing my traffic to the internet from my local users thourgh that IP number for TrustedL3 on the primary firewall.

 

Thanks!

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hi Jim

 

Once the cluster is created, the IP will become shared between the 2 firewalls, so if the primary firewall were to go down, the IP address is 'moved over' (by means of gratuitous ARP) to the secondary device

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hi Jim

 

Once the cluster is created, the IP will become shared between the 2 firewalls, so if the primary firewall were to go down, the IP address is 'moved over' (by means of gratuitous ARP) to the secondary device

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 1 accepted solution
  • 1812 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!