Active passive to active active mode

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Active passive to active active mode

Not applicable

I have a pair of PA3020 in active-passive mode within the same datacenter pointing to the same ISP. We are planning to move the standby firewall to the new redundancy site and enable active-active mode pointing to a new redundant ISP. The 2 firewalls will be connected by dark fiber within a few kilometers. What are the best practices and steps to break HA active-passive mode and re-enable active-active mode? What are the potential challenges and how to avoid them (if possible)?

Thanks!

Peter Man

4 REPLIES 4

L6 Presenter

Hi ,

When you change active/passive configuration to active/active configuration, firewall looses active/passive configuration. Basically its new active/active failover configuration.

I would suggest suspend passive unit first.

Then configure existing active unit in active/active configuration.

Then change configuration for suspended firewall to active/active configuration, and make it functional again.

I  would advice to do this in downtime.

Regards,

Hardik Shah

L5 Sessionator

Hi Peter,

Before that, keep in mind that the only (major) reason for configuring activ activ is asyméetric routing. Else .... exept pleasure to configure it ... It's more difficult to configure, more difficult to maintain, more difficult to troubleshoot .... then keep simple is always the best solution. Not sure you will make asymetric routing between your datacanter

Ask you the question: Do you really need it ?? Does it make sense for me ??

Hope help

V.

Totally agree. I thought active active mode is the only option in this scenario with 2 datacenters (connected by dark fibre ring) and 2 ISPs?

Hi Peter,

if you are able to run a layer2-vlan "before" and "after" the PAN even through the distributed datacenter design, active-passiv is still possible.

Best regards!

  • 4309 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!