Advertise NAT Pool via BGP

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

Advertise NAT Pool via BGP

L0 Member

Hi,

 

I need to advertise a NAT pool to an external partry via BGP. When i attmpt to configure the static route with as below.

 

 

nat configuration.png

 

 

I get the error message when attemping to save the virtual route configuration.

 

nat error.png

 

What is the correct way to configure a static route for this?

 

1 accepted solution

Accepted Solutions

L5 Sessionator

You have to set an interface . I typically use the untrust interface and next hop to none. 

I've never tried it but you could probably add a loopback address of the NAT pool subnet. That should get the necessary subnet into the routing table so BGP can advertise. 

View solution in original post

1 REPLY 1

L5 Sessionator

You have to set an interface . I typically use the untrust interface and next hop to none. 

I've never tried it but you could probably add a loopback address of the NAT pool subnet. That should get the necessary subnet into the routing table so BGP can advertise. 

  • 1 accepted solution
  • 4789 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!