02-06-2018 02:16 PM
Hi,
I need to advertise a NAT pool to an external partry via BGP. When i attmpt to configure the static route with as below.
I get the error message when attemping to save the virtual route configuration.
What is the correct way to configure a static route for this?
02-08-2018 08:49 AM
You have to set an interface . I typically use the untrust interface and next hop to none.
I've never tried it but you could probably add a loopback address of the NAT pool subnet. That should get the necessary subnet into the routing table so BGP can advertise.
02-08-2018 08:49 AM
You have to set an interface . I typically use the untrust interface and next hop to none.
I've never tried it but you could probably add a loopback address of the NAT pool subnet. That should get the necessary subnet into the routing table so BGP can advertise.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
