My environment has Palo Alto Firewalls that has Aggregate Interface configuration and use. There are infrequent issues with them and I have some questions:
Thanks in advance
Solved! Go to Solution.
How is you setup look?. Meaning what do you have on the other of the Palo Alto, and how is the port setup on the other end. I normally start troubleshooting on the switch side.
Edwin thank you for your reply. I am looking for any "CLI" commands that are common to trouble shooting issues with aggregate interfaces on Palo Alto Firewall. Do you have any that you share with me? Pick the scenarios(any).
Thanks in advance.
try to viewing the l2ctrld.log file. Check link below.
show system state | match debug.level OR debug l2ctrld global show
debug l2ctrld global [ on | off | show ]
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!