Allow traffic mikrotik site to site.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Allow traffic mikrotik site to site.

L0 Member

Hi everyone. I just installed a firewall at an office. Office A is connected to office B via two site-to-site mikrotiks.
Inside office A there is a server that records the presence of office B employees.
After introducing the PA440 it stopped working..
Currently the firewall is configured like this:
Previously the router in office A was connected directly to the mikrotik and it worked via the open ports.
Now there is the PA440 between the router and the mikrotik. The router is configured in DMZ on the WAN port of the PA440.
How can I allow mikrotik traffic?
The mikrotiks were installed by another company and I am not allowed to check or change the configurations.

I'm not very practical. Please advise me the easiest solution?

1 REPLY 1

Community Team Member

Hi @AlessioS ,

 

It might help providing a small diagram to help visualize because I fail to understand how traffic is flowing exactly.

 

Are you seeing blocked or dropped packets on the PA-440 ? Is the PA configured to allow the related traffic ?

 

Kind regards,

-Kim.

 

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.
  • 297 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!