10-14-2022 07:09 AM
Hi all,
Site A
Source Zone: test-DMZ
Interface: ae 1 (172.16.1.1)
Tunnel Interface is in internal-trust zone.
Static route set to destination 10.10.10.1
I have an IPsec tunnel between 2 sites.
However, i want to allow traffic from other sources to test-DMZ zone.
How can i deploy policy that will allow me to communicate from test-DMZ to outside internet and vice versa without breaking the IPsec connection?
10-17-2022 07:55 PM
Hi @mike.07 ,
Do you have specific public servers you would like the internet to access? Setting up access from the outside zone to your DMZ zone should not affect the tunnel you have between the two-sites.
10-20-2022 11:40 AM
HI Jay,
Yes, i need to allow access to one specific server, problem is it is a FQDN which resolves to multiple IPs.
Is there any way i can create Source NAT that would allow traffic to FQDN?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
