- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
01-06-2011 12:54 PM
Hello,
Has anyone been experiencing any issues with using AOL Mail through a PAN device since last week? I'm assuming AOL changed the behavior of their webmail site and now sections of the portal are not available - such as the inbox. Errors also pop up saying "we have encountered difficulties". However, outside the PAN device, the portal loads properly. We do block "AIM-Express" and IM - so perhaps it is trying to load a componant of that - however, the logs do not show any "denies" on that application. Just curious if anyone has also seen this. It's not a high priority for us - but assuming something changed on the AOL side as I have not seen the AOL applications having been updated in the content updates. Thanks.
Mike
01-07-2011 07:00 PM
Hi Mike,
We haven't received any recent calls, emails or task requests pertaining to the issue you've just described. I'm going to run some tests in our lab and see if I can replicate your findings. I hope to get back to you on this soon.
Thanks,
Renato
01-10-2011 02:39 PM
Thank you very much. Currently from testing - the only method that will allow AOL mail to work 100% is to do an "any/any" policy of my workstation IP. Allowing just the "aim-mail" application is not enough - removing Vuln/AV/Spyware/URLfilter is not enough. Very odd. Thanks again.
Mike
01-11-2011 10:42 AM
Thank you very much for pointing that out. Are you a PAN customer also experiencing an issue with AOL mail? We are going to use that as our work around, since we do not support AOL web mail as a corporate application. This gives the user at least access. But the engineer in me is still curious on what in the conversation between AOL and the PAN device is being effected. A full "any/any" does work - so that points to a change either on the AOL side or the content side of the PAN device (or both), I would think. Thanks so much.
Cheers,
Mike
01-19-2011 09:17 AM
Renato,
Curious if you were able to replicate issue in the lab? It appears there is some type of IM conflict perhaps? We block IM and if adding AOL Mail and AIM Express is the only way to get AOL mail to work then we are going against our IM policy. Should I place a request an application review request? Thanks so much.
Mike
01-19-2011 09:23 AM
We have run into the same issue, we don't allow the use of IM but don't usually block webmail, as a work around we have told the users to click on the basic view and it seems to work. The primary page presented at login is being blocked by the IM application filter it would appear that AOL changed the way their site works. Maybe PA should look into updating their application filter?
01-19-2011 09:30 AM
Thanks so much for your input. That's 3 customers having the same issue and not an isolated case. I'm actually now getting pressure from my CTO and CEO to find a solution and get it to work properly. Anything Palo can do to correct the application objects for AOL would be greatly appreciated. I really hate to open AIM Express just to get to mail.
Cheers,
Mike
01-19-2011 02:14 PM
Sorry for the delay Mike. I am blocking aim-express and aim. I see those apps being discarded and yet I don't see any issues when accessing my inbox. I've attached a couple of screenshots. This PAN is running 3.1.7 and I've tested on 3.1.6 as well with the same results. You may need to open a case with Support so that we can do further root cause analysis.
Regards,
Renato
01-20-2011 07:09 AM
In response to mgoodnow's issue, we are having the same issue as well. We are blocking aim and aim-express. When I check my discards, we are showing that we are discarding aim-express and showing that aim-mail is flowing through, but still cannot access mail (tells me that "An error occurred while retrieving your messages. Try again." When I try to access the "Settings", it gets stuck in "Loading", but nothing ends up loading.
The one difference is I don't see "aim-base" in my sessions like you have in your screenshot.
Looks like a support case will need to be created for further troubleshooting.
01-21-2011 06:10 AM
Hi Mike,
Do you mind calling Support and opening a case?
Regards,
Renato
01-21-2011 10:26 AM
I have submitted a support request. Thank you!
Mike
01-24-2011 06:03 AM
I placed a support call last Friday and the response was that they are aware of the issue and that it should be resolved in this weeks content update. As always Palo support rocks!
Mike
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!