08-16-2016 04:45 PM
I had a customer connecting to an application from trust to untrust. It was working and then suddenly stopped working.
I could see in the logs it was coming as port 443 and application -incomplete and then next day it started working with port 443 and application ssl. Any logical reason why this would happen. Running 7.0.6 PA200.
08-16-2016 04:49 PM
Application incomplete usually means that the 3-way TCP handshake didn't complete. It's possible that the service on untrust was not working properly at the time, or that their connection to the Internet was disrupted.
You can add additional columns to your traffic log to show # of packets sent/received. If you see a lot of packets sent, but nothing received for those traffic flows, then that would point to one of the scenarios above.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
