Apply QoS for uploading

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Apply QoS for uploading

L4 Transporter

Hi,

I have the scenario  , user wants upload or stream to outside the campus.

Pa in virtual wire mode  and  after pa there is ASA firewall , 

How can I makesure the streaming or uploading is not interuptted by other traffic 

 

Thanks

6 REPLIES 6

Cyber Elite
Cyber Elite

Hi!

 

have you checked out this article already? Getting Started: Quality of Service

 

If you want to make sure the outbound traffic has a bandwidth guarantee, you'll need to create a QoS profile with one class that has a bandwidth guarantee set to it. you will want to attach that profile to your external interface (QoS is applied on the _egress_ interface of the flow) and create a QoS policy to identify this user's outbound stream to that class

 

Tom

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

L5 Sessionator

Hi,

From qos policy , how palo alto differentiate  between policy for uploading  and downloading ?

for example an ip 192.168.1.100 is streaming an av ,the source must be  192.168.1.100 and if class 3 and we have same class 3 

on downloading 

 

Thanks

The different egress zones. The download policy would be the QoS on the trust interface, where the upload policy would be the Qos Policy on the UnTrust interface. Therefore the traffic passing through the same class doesn't really matter, since uploading and downloading is never done through the same egress zone. 

Hi,

So the rule look like the below ?

 

upload qos.png

 

Thanks

Hi,

For example if the topology like below , Is it enough to mark the qos only on PA  or does it required to mark on other  routers ,switch and asa( nating happening here) .

PA Is in vwire mode 

 

topology

 

Thanks

 

  • 3238 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!