- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
08-25-2024 01:37 AM
Hello,
I have now paloalto pa-1410 in my network and software panos:11.1.2-h3.
I wanted to know how many arp entries "IP <--> mac address" can be stored in the firewall, because I cant see it listed here.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cli3CAC
TIA
08-25-2024 03:01 PM
Hello @MRamadanAHafiez
thanks for posting.
You can fid that information from CLI by using this command: show system state | match cfg.general.max-arp
The output will be in hexadecimal, so you will have to convert it to decimal.
Kind Regards
Pavel
08-26-2024 02:57 PM
Hello @MRamadanAHafiez
only to add, this information is also available in product comparison page: https://www.paloaltonetworks.com/products/product-comparison?chosen=pa-1410,pa-1420 under L2 Forwarding section.
Kind Regards
Pavel
08-25-2024 03:01 PM
Hello @MRamadanAHafiez
thanks for posting.
You can fid that information from CLI by using this command: show system state | match cfg.general.max-arp
The output will be in hexadecimal, so you will have to convert it to decimal.
Kind Regards
Pavel
08-26-2024 05:30 AM
Thank you so much, I got back 0xbb8 "3000"
08-26-2024 02:57 PM
Hello @MRamadanAHafiez
only to add, this information is also available in product comparison page: https://www.paloaltonetworks.com/products/product-comparison?chosen=pa-1410,pa-1420 under L2 Forwarding section.
Kind Regards
Pavel
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!