ARP on Firewall interface default 1800 sec

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ARP on Firewall interface default 1800 sec

L4 Transporter

I have firewalll connected to ISP link , I want to check total number of minutes ARP entry is there from next hop I can see default is 1800 sec.

SD-WAN | Cloud Networking | PCNSE | ICSI CNSS | MCNA | | CCNP | CCSA | SPSP | SPSX | F5-101 |
1 REPLY 1

L3 Networker

The default AP entry cache on the PA is 30 mins as you already mentioned:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CldWCAS 

 

If you want to update upstream ARP cache then GARP technique can be used:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clu9CAC 

 

 

  • 2065 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!