We have a customer who is facing issue described by this KB article :
I wonder whether it is possible to change the default timeout value which is set to 1800 seconds ?
It could be very helpfull in some situations, and most of the network devices allow to change this value.
I searched the Admin guide and CLI guide as well as the KB but I didn't find anything concerning this point.
Another workaround could be to put a L3 device (L3 switch or such) in front of your PA and setup a linknet between this L3 device and the PA box.
PA <- 10.0.0.1/30, 10.0.0.2/30 -> L3-device <- 192.168.255.254/16
This way the PA box only see one mac, the mac of 10.0.0.2 (or whatever ip you setup). While the L3-device takes the hit regarding shitloads of clients vs. mac-addresses.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!