07-25-2013 02:12 AM
Hi,
upgrading from 4.1.13 to 5.0.0 using upload option;
device boots and at %10 for autocommit it fails and again and again trying to autocommit and fails at %10
any idea ?
07-25-2013 03:39 AM
Hi,
There is no such specific known issue that has been seen where the Auto commit fails up on upgrade to 5.0.0.
Does it show you an error as to why the Auto commit failed? ( show jobs id will give you details)
10 % would mean that the Phase 1 parsing of all the management clients is itself failing. The job details will tell you which client is failing.
Or
there can be a recovery attempt made from the Maintenance mode to see if more information can be found on why the commit fails, but its best to involve TAC for option 2 if nothing specific is found in option 1
07-25-2013 03:39 AM
Hi,
There is no such specific known issue that has been seen where the Auto commit fails up on upgrade to 5.0.0.
Does it show you an error as to why the Auto commit failed? ( show jobs id will give you details)
10 % would mean that the Phase 1 parsing of all the management clients is itself failing. The job details will tell you which client is failing.
Or
there can be a recovery attempt made from the Maintenance mode to see if more information can be found on why the commit fails, but its best to involve TAC for option 2 if nothing specific is found in option 1
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
