Dear, good evening, can someone please help me.
I have two Palo Alto configured by BGP and I am sending some routes via bgp and they appear as "loose ?" what can I do in this case, how do I solve this problem?
Thank you in advance for your support.
Thank you for the post @Metgatz
The route to 192.168.81.0/24 in your screen shot is missing flag: A (Active). Could you make sure that Firewall can reach the next hop: 192.168.244.128? This might be corresponding to this KB: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClZ4CAK
Also, if this is new installation, could you make sure that "Install Route" Check Box is selected under: BGP > General > Options.
Good evening/good morning.
Thank you very much for your reply.
The strange thing is the following:
I have connectivity, the route operates but it still appears as "Loose", this time it appears as Active/Loose.
I restarted the BGP sessions, I restarted up to the equipment.
It still appears like this, I would like it to appear as it should, with its corresponding Metric, active route AB.
Please your support, thank you very much
I remain attentive, best regards
Thank you for quick reply @Metgatz
These flags: A?B are expected: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClZGCA0 By looking into routing table in one of my Firewall, I can also see all BGP learned routes with A?B. You do not need to take any action.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!