- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
01-31-2012 01:00 AM
I've setup bgp with this guide(for active/passive configuration):
https://live.paloaltonetworks.com/docs/DOC-1572
I needed to prioritize one ISP so I changed configuration with this guide:
https://live.paloaltonetworks.com/docs/DOC-1573
and
https://live.paloaltonetworks.com/docs/DOC-1574
The problem now is, I don't see any RIB-out prefixes and my ISP peer is not getting them either.
Help needed.
02-03-2012 03:34 PM
Hi,
The route which you want in the RIB-out is it existing in the route table? The route which you want to advertise out via BGP needs to have been learned either via a IGP routing protocol or a IBGP update from your own AS.
Hope this helps.
Thanks
02-06-2012 01:01 AM
Hi.
I'm using ebgp. Ca you manually enter the route anywhere. I thought it was enetered in network\virtual-router\default\bgp\export rules ??
02-08-2012 11:28 AM
If the route on the advertising PAN is learned via IGP and you want to advertise the IGP route to EBGP, in this case you will have to use the redistribution rule. Please choose the route you would like to advertise in the redistribution rule and set the values you would like to have for that redistributed route.
Hope this helps.
Thanks
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!