03-09-2023 09:45 AM - edited 03-09-2023 09:47 AM
Hi,
I currently have a static NAT bi-directional policy, number 6 in the screenshot, that publishes an internal server (LAB-Skype) on Internet using a public IP (LAB-Skype-pub). This works fine.
Now I need to add an exception for port 443 for that public IP, which needs to be redirected to port 4443 towards the same internal server.
I tried to create a policy translating the original packet arriving at the public server (LAB-Skype-pub tcp/443) to the internal server (LAB-Skype tcp/4443). this is policy number 5 in the screenshot.
Unfortunately, I don't see any hit (0) on the policy. Any idea about what I am doing wrong?
03-09-2023 10:45 AM
If traffic comes from External zone it is destined to your firewall public IP.
Your firewall public IP is located in External zone.
It means that rule 5 destination zone must be External for this rule to match.
03-09-2023 10:45 AM
If traffic comes from External zone it is destined to your firewall public IP.
Your firewall public IP is located in External zone.
It means that rule 5 destination zone must be External for this rule to match.
03-13-2023 07:08 AM
thanks a lot, you were so right!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
