Can't log into Panorama after changing to Panorama Mode

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Can't log into Panorama after changing to Panorama Mode

L0 Member

Our Panorama VM was operating in legacy mode due to under provisioning when it was deployed. I recently had its resources increased to the Panorama Mode minimums and activated Panorama mode using "request system system-mode panorama". Everything seemed fine and Panorama rebooted.'

 

It came back up after 10-15 minutes, but I have not been able to log into it with local or radius admin accounts. It's been 2 hours. 

 

Is this normal? If not, what should my next steps be to fix this?

2 REPLIES 2

Cyber Elite
Cyber Elite

@jcappsnet,

Do you get anything from the console? Do you still see CMS Login when you posted this or do you have a normal login prompt? This shouldn't take two hours to complete. 

I have the normal "Panorama login:" prompt.  Upon closer inspection and compare the disk and cpu activity before and after the change, it does look like the VM is chugging away at something.  Consistent CPU and disk activity where before it was more or less flat.

  • 1533 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!