03-07-2013 03:59 PM
Yes, aggregate links can be vwire.
03-09-2013 12:28 AM
Just to verify, I assume this means that on the PA you only setup VWIRE and thats it?
And the aggregating stuff is made by the endpoints (the switch/router/whatever before/after the PA device)?
Or do you have to configure aggregated interfaces on the PA itself for this when using VWIRE?
03-09-2013 02:10 AM
Hi Mikand,
Leaving the link aggregation to the end-points is recommended when configuring vwire on the firewall. It is possible to use aggregate interfaces on the firewall on vwire, but as far as I know there is no benefit to doing this and it is not considered best practice.
Cheers,
Kelly
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
