Cannot access peer device via Web UI or SSH

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Cannot access peer device via Web UI or SSH

L1 Bithead

Hi All, It's unable to access the Peer firewall IP using Web UI or SSH. I'm able to access the Active device management interface and the HA status is also ok.

Screenshot 2022-11-25 145955.jpg

2 accepted solutions

Accepted Solutions

Cyber Elite
Cyber Elite

Hello @RcJ1980

 

thanks for the post in LIVEcommunity!

 

- Are you able to confirm whether management interface is up on switch side and you are able to see ARP entry corresponding to management IP address of passive Firewall? 

 

- Do you have console access to the passive Firewall?

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

View solution in original post

Hi @RcJ1980 ,

 

Just to confirm you are trying to reach passive member using it mgmt interface, or you are trying to connect via HA1 interface?

If you are using HA1 and HA2 dedicated interfaces, they are completely independent from OOB mgmt interface. Which means that device is up and running (HA1 will be green if it can send and receive heartbeats with primary member), and would point to issues with physical connectivity for the OOB mgmt interface.  

View solution in original post

4 REPLIES 4

Cyber Elite
Cyber Elite

Hello @RcJ1980

 

thanks for the post in LIVEcommunity!

 

- Are you able to confirm whether management interface is up on switch side and you are able to see ARP entry corresponding to management IP address of passive Firewall? 

 

- Do you have console access to the passive Firewall?

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

Hi @PavelK , Thanks for your reply. I will verify this from the management switch and get back to you.

Hi @RcJ1980 ,

 

Just to confirm you are trying to reach passive member using it mgmt interface, or you are trying to connect via HA1 interface?

If you are using HA1 and HA2 dedicated interfaces, they are completely independent from OOB mgmt interface. Which means that device is up and running (HA1 will be green if it can send and receive heartbeats with primary member), and would point to issues with physical connectivity for the OOB mgmt interface.  

L1 Bithead

When we check from the management switch, the interface was down due to bad cable, so we had to replace the cable. now we are able to reach the passive firewall from the LAN. Thanks everyone for the support

  • 2 accepted solutions
  • 2577 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!