02-26-2016 03:15 AM
Hi,
I'm not able to access to firewall once after upgrade FW from os version 6.1.4 to 6.1.10, any known issues or any possiabliity that FW gone to maintaince mode else reboot loop mode??
Please assist.
Regards,
Kotresha
02-26-2016 03:35 AM
If the firewall does not come back from an upgrade reboot you should get on the console port to see what the status messages say.
Yes, it is likely then you will see maintenance mode and can try to recover from there.
02-26-2016 05:30 AM
Whats the genreal downtime during rebbot?
02-26-2016 06:38 AM
Hello,
It honestly depends on the model that you are running. The older models like the 2000's could take up to 20 min or more (from what I have observed). The 3000's take 5-10 minutes (from what I have observed). My lab 200 can take anywhere from 5-15 minutes (from what I have observed).
Also remember that if you are running in FIPS mode, the console is disabled.
I hope this helps!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
