02-10-2019 07:53 PM
My network has 2 outgoing data lines. Using one virtual router and set static default route for the 2 interfaces. The 1st interface has its Metric set to higher priority. As I want to divide the traffic. Some zones were force to use the 2nd interface by setting "Police Based Forwarding".
Above settings work until I found that the 2nd interface was unable to reach internet due to asymmetric routing. So I create a new virtual router and a static default route for the 2nd interface.With the new virtual router. The 2nd interface can contact from/to internet. But those zones rely on it to reach internet were all down.
Some policies (Security, NAT, PBF) were review. I still have no idea what cause the problem.
02-11-2019 08:40 AM
Are the interfaces associated with the down zones included in the second VR configuration?
02-11-2019 05:16 PM - edited 02-11-2019 05:16 PM
hello rmfalconer,
Yes. When I create the new VR. I add the 2nd interface to this VR + the new default route.
No policies changed. Those zones are associate to the 2nd interface (in PBF). This work before even using only 1 VR.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
