Change speed/duplex on 10G SFP port for PA-5220
cancel
Showing results for 
Search instead for 
Did you mean: 

Change speed/duplex on 10G SFP port for PA-5220

L2 Linker

Hello,

 

Is it possible to hardcode speed/duplex for 10G SFP port on PA-5220 device? i am getting below error:

 

>set network interface ethernet ethernet1/5 link-speed 10000 link-duplex full 
Error: 
Server error : ethernet1/5 -> link-duplex 'full' is not a valid reference 
ethernet1/5 -> link-duplex is invalid 

 

I have gone through the article that mentiones 1G port requires setting to be "auto".

https://live.paloaltonetworks.com/t5/Configuration-Articles/Cannot-Commit-when-Interfaces-are-Set-to...

 

Is this applicable for 10G SFP port as well? Appreciate the help !!

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

@skanani,

On any SFP or SFP+ port the firewall is only capable of Link Duplex Auto. 

View solution in original post

4 REPLIES 4

Cyber Elite
Cyber Elite

@skanani,

On any SFP or SFP+ port the firewall is only capable of Link Duplex Auto. 

View solution in original post

What about the speed? Can you confirm that it can't be configured?

@NikolayDimitrov,

You can configure speed on the interface on the 5220 without issue. 

About optical SFP speed, so it can be configured on 5000 or 7000 series?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!