Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
06-12-2013 10:37 AM
Hi,
Device1 Active
Device2 Passive
When a failover happens...it takes about 7-8 timeouts(45 second) : device1 passive device2 active
When a failover happens again it takes about 1 timeout(good time): device1 active device2 passive
Any ideas ?
Thanks.
06-12-2013 11:04 AM
Hi,
Same fail-over condition on both device ?
v.
06-12-2013 11:08 AM
Yes sure.both same config.
06-12-2013 11:09 AM
A bit of a broad question because of the various factors that may be in play. But typically the passive unit will be available very quickly it's a matter of other factors coming over.
If this is a simple L3 setup no dynamic routing you can tail a log that will show you when the Gratuitous ARP is sent out.
On the passive unit use this command via cli.
pa> tail follow yes dp-log pan_dha.log
Suspend the active-
You should see this log-
Jan 1 00:00:16 Send gratuitous ARP
See if this differs between the two firewalls when taking over. Will be a good starting point.
Dominic
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
