we have configured Panorama M200 in HA , configured managed collector with local log collector , configured collector group and added local log collector of both panorama, redundancy is enabled in collector group (log forwarding preference is not configured.
Above configuration we have done to store same logs on both local log collector and enable redundancy So if complete Pri M200 box failed , we will have same logs in Sec M200 local log collector.
But as per configuration logging is not happening properly on secondary panorama , there is a difference in system dis-space utilization
Also we sec panorama log collector not receiving any log ( as per our requirement and redundancy conifg secondaryM200 also should store the logs)
is there any configuration issue , or the output in sec m200 is normal ? how we can check same logs are store or not in sec M200 ?
We are able to see same logs in both M200 webgui , as per my understanding its because of collector group config .
I do not think from sec M200 CLI you will see incoming logs.
Please read this
Thank you for information.
I have read many articles to investigate on this issue. Due to differences in disk utilization we want to check logging on sec m200. Also redistribution state is already completed and status is none when we deployed sec m200 in HA with pri M200 five month back. Due to pci standard logging is very important for us.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!